What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 02:01

One is “what exactly is in a ‘surge protector’ ? ”
An AC voltage/ current source, and an ac inductive load.
2024–10–16 [ OO OLAOYE OYEBODE ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
The bolt then partially travels down the line to your home.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What is your review of The Office (U.S. TV series)?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
At one ohm, the resistor has a maximum of 1 watt power.
This is 'the assistant's answer'
What does pompano fish taste like?
2024–10–10[John johnson John Johnson ]
a photo is worth a thousand words.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
At least they know the answer if they wanted it.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Barnstars:
but I think this circuit , shows a few more pieces.
[image of Common-mode choke]
What is the most gay experience with your dad?
but this device (an Inductor) … impedes the rapid changes in the current.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
In schematic diagrams this is the symbol for a fuse:
Is there a correlation between being a medium and mental health?
what exactly is a ‘surge’ protector?
Edit 2024–10.
First Sentence:
LeBron James’ message for Caitlin Clark after dominant return from injury - New York Post
eight
The other is “what does a “fuse” do?”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Why is Tiananmen Square censored?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
[old diagram got deleted by accident]
I post the exact comment here.
Have your parents ever walked in on you?
So, the voltage could go up to 500 volts, and the fuse will not open up.
(Dc diagram shown, AC is similar).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What’s one positive trait you’ve gained because of BPD?
For this case there are devices called Metal oxide varistors (MOV).
A fuse is a non-resetable over current circuit protector.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
MindsEye Is Officially The Worst Reviewed Game Of The Year So Far - TheGamer
One
This one hit behind the barn.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
There are three different concepts here that are getting confused.
This is where the MOV conducts again, and dissipated the energy.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is where this question deviates from being a 'generic' question, and becomes more specific.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
These are simplified answers to the original question, and does not change anything I wrote above.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
It seems Mohan does not understand the difference between a comment and an Answer.
He then describes Rainy Season and Lightning.
But… the neutral is now “floating” because of the 1 ohm resistance.
A circuit breaker is similar, but is resettable.
He then asserts :
Upvotes:
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
The third is lightning and “how it gets conducted into a home.”
What is lightning?
What does a fuse do?
so, what happens?
This device then solves the entire problem.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Here is a simplified AC power diagram.
Because the load is inductive, the current lags the voltage.(by a bit).
These devices are installed between the “hot” and “neutral” and protective ground.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
There are two important concepts here.
nine
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–14 [Omar Gharbi Omar Gharbi ]
It also is a device that limits the change in current flow.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
the problem then depends on "how fast does the fuse operate?".
The MOV will conduct when the voltage exceeds 50% of line voltage.
He then describes the function of a fuse.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
But it can get overloaded, and no longer works.
Now when you have a certain ac resistance, then a current flows in a loop.